Other

• Fully automatic machine suitable for separating-dividing bundles arriving from a rotary or autoplatum die-cutter built with a span up to 320 cm.
• The upper hydraulic presses and the pneumatic cylinder for tilting the front belt are activated with the separation system.
• Our separators can have 3 separation systems: tilting, forward, side.
• Maximum height of the bundles: up to 400 mm.
• Min height of the bundles: 50 mm.
• Variable cycle time depending on the length of the box and can be evaluated from 7 to 9 seconds.
• Transport both at the entrance and at the exit with self-guided belt.
• Electrohydraulic operation.
• Electrical system on board.
• Min. Size of separation 170 mm.
• Siemens S7 PLC.
• Command and control system via touch screen panel with alarm display.
• Set of pre-set breaking programs for speeding up the machine set up.
• Conveyor belts controlled by inverters in order to vary the speed of the same according to the needs of the operator.
• The separator is fixed to the ground.
• Electrical, pneumatic and mechanical safety devices according to European standards.
• The machine is supplied with the CE mark.

• The pile-turning machine is a machine created to overturn stacks of corrugated or stretched cardboard upside down. The structure of the rotating part of the pile with circular shaped U-shaped profiles, with electro-welded U-shaped steel profiles of great thickness.
• Inlet and outlet acetal belts of the stack installed on the pile turner.
• Lifting of 1 acetal conveyor by means of an electric system.
• The rotation movement is carried out by 2 large double chains with self-braking electric motor and gear motor. The rotation is supported by 4 wheels.
• Stack loading and unloading are carried out with acetal belts at a height of about 350 mm.
• Maximum pile height 2000 mm.
• All movements can also be manually controlled from the control console using the buttons.
• Electrical panel for the control and management of the pile-turner with Siemens PLC.
• Display of alarms and signals for the operator present on the control desk via alarm display.
• Our pile turners can turn 5 m by 2.5 m piles.

Debancalizer is a machine made to remove the wooden pallet from under the corrugated cardboard stack.
The system works in this way, there is a system in which the stack of cardboard with the pallet is deposited by a "fork lift". Once the stack has been deposited, after a certain time, a depalletizer bar lifts and pushes the stack of cardboard onto a belt placed a little higher while the pallet remains on the transport and from here it is either removed manually or sent to another belt.

Machine designed to position the pallets of corrugated cardboard already prepared and strapped one on top of the other. The machine is built in electro-welded steel sections and is summarily composed of:

• A transport roller conveyor with motorised rollers.
• A centering device for packs with sides about 3 m high.
• A pneumatic system that lifts the stack.
• A system for lifting the stack with retractable forks.
• All managed by a Siemens PLC and relative control panel with lectern and push-button panel.
• The machine can double corrugated cardboard stacks up to 2500 mm x 2500 mm and a maximum height of the single stack of 1500 mm all inclusive.
• Maximum weight of the single piles to double 1500 Kg.